How to use hydrogen peroxide for the pool?
Perhydrol (hydrogen peroxide) for the pool is used instead of aggressive chlorine-containing substances that prevent the active bloom of water. This mainly applies to small pools in personal plots and in country houses, which people have recently been actively acquiring, trying to take a break from the bustle of the city. Cleaning the pool with hydrogen peroxide in this case is the best option.
Hydrogen peroxide for the pool collects extremely positive reviews. And there is a simple explanation for this.
- Special disinfectants that can be purchased in the store are quite expensive and it is not always possible get them on time. Perhydrol is several times cheaper.
- Peroxide does not have an unpleasant odor, color, but at the same time effectively purifies the water from invisible “inhabitants” of your pool. All bacteria harmful to humans are destroyed, peroxide disappears without a trace during the day and no effect on human skin occurs.
- And, of course, I want the water to be clear. Standing water very quickly lends itself to blooming - the walls and bottom of the pool can become covered with an unpleasant slippery coating, and the water can acquire a greenish tint. Adding perhydrol completely solves this problem.
How do I clean my pool with hydrogen peroxide?
When applying hydrogen peroxide for the pool, the dosage is calculated depending on its volume. On average, about 700 ml of the substance is taken for 1 cubic meter of water. That is, 7 liters of antibacterial liquid should be poured into a pool with a volume of 10 cubic meters. If serious biological contamination is observed, then the dose can be doubled, calculating per 1 cubic meter - one and a half liters of peroxide.
When working, observe basic precautions - the pool should be treated only with gloves, as perhydrol on contact with skin can cause chemical burns. In this case, the filter pump must be switched on during the entire cleaning process. Before bathing, the water needs to settle for about a day - during this time, not a trace of peroxide will remain, and the water will become completely clean. The cleaning sequence is as follows:
- Pour the required amount of perhydrol into the reservoir.
- If a concentration of less than 1000 ml per cubic meter is used, then leave the water for a day, if the concentration is higher, it is better to refrain from bathing for three days.
- No need to cover the pond! The reacted oxygen must escape freely.
- As a result of the reaction of contaminated water and perhydrol, a brown coating can form on the walls. It can be easily removed with a skimmer. In the same way, the suspension is removed from the water surface.
After such treatment, the water will become crystal clear and remain transparent for a month. After that, the treatment can be repeated, halving the dosage of perhydrol.
Source http: // lmoroshkina. ru
GOST 10929-76. Reagents. Hydrogen peroxide. Specifications (with Amendments N 1, 2)
GOST 10929-76 (ST SEV 5768-86) Group L51
STATE STANDARD OF THE UNION OF SSR
Hydrogen reagents PEROXIDE Specification Reagents. Hydrogen peroxide. Specifications
5. REPLACE GOST 10929-64
6. REFERENCE REGULATORY AND TECHNICAL DOCUMENTS
Designation of NTD,