Solvent of R-12 3814009090

Mass fraction of water in the R-12 solvent,%, no more: 1 Relative volatility with respect to the ethyl ester of the R-12 solvent: 8-14 Acid number of the R-12 solvent, mg KOH / g, no more: 0.1 Number coagulation of solvent R-12,%, not less: 22

Dissolved R-12 film-formers: Perchlorovinyl, polyacrylate

The main brands of paints and varnishes used with solvent R-12: Enamels: HV- 533, XB-785, XB-1120, AK-194

Danger to humans: When using a solvent, always remember a simple truth. Useful chemicals are extremely rare. No safety precautions when working with a solvent will be superfluous !!!

Danger from single exposure to high concentrations: The vapor irritates the eyes and respiratory tract. The substance may have effects on the central nervous system, liver, kidneys, and gastrointestinal tract. The substance can be absorbed into the body by inhalation and through the skin.

Hazards from prolonged contact: Prolonged contact with skin may cause dermatitis. Substance may have effects on blood and bone marrow.

Workplace guidelines: Cut-off limit: 750 ppm; 1780 mg / m ^ 3 (ACGIH 1993-1993).

Fire hazard: Highly flammable. They are classified as 3.1 flammable liquids with a flash point of less than +23 degrees C. Avoid open flames, sparks and smoking.

Vapor-air mixtures are explosive.

A harmful contamination of the air will be reached rather quickly on evaporation of this substance at 20 ° C on spraying, even faster.

The vapor is heavier than air and may travel along the ground; possible remote fire. The substance can form explosive peroxides on contact with strong oxidants such as acetic acid, nitric acid, hydrogen peroxide. Reacts with chloroform and bromoform under normal conditions causing fire and explosion hazard. Attacks certain types of plastics.

Reacts with chloroform and bromoform under normal conditions causing fire and explosion hazard. Attacks certain types of plastics.

Reacts with chloroform and bromoform under normal conditions causing fire and explosion hazard. Attacks some types of plastics.